Bios Settings For Mac

Bios Settings For Memory
Bios Settings For Mac Os
Macbook Pro Bios Key

The BIOS setup utility access key differs between computer systems, motherboard manufacturers, and BIOS manufacturers — some of the common keys include F1, F2, and the Del key. Generally, the motherboard will post this information when the computer first turns on, but it's best to look it up beforehand. A system's BIOS, or Basic Input/Output System, is a software chip in a computer's motherboard that determines how the operating system functions. All Windows operating systems use BIOS, while MacBook computers use an equivalent called EFI, or Extensible Firmware Interface. This could be why Apple left out the pre-boot settings completely; it's all integrated. – user1686 Dec 30 '11 at 22:09 1 Actually newer Macs which can run windows do have BIOS. Anything you would set in bios, you can write to the non volatile ram from any OS X booted OS and then those variables and settings are applied next boot. There is no bios and no concept of a user navigable hierarchy of settings to adjust before any OS loads to Apple hardware. Most of what you might do “in BIOS” isn't possible.

To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.

Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
T: Start up in target disk mode. Disabled when using a firmware password.
Command-V: Start up in verbose mode. Disabled when using a firmware password.
Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.

If a key combination doesn't work

If a key combination doesn't work at startup, one of these these solutions might help:

Be sure to press and hold all keys in the combination together, not one at a time.
Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.

Bios Settings For Memory

Remember that some key combinations are disabled when your Mac is using a firmware password. Android emulator mac os.

Learn more